Flushing manifold

Terminating drip laterals are irrelevant if you have a flushing manifold. You connect the end of the drip laterals to the flushing manifold using the appropriate connection type for the tube type of the flushing manifold.

Do not connect drip laterals to the flushing manifold until each lateral has been flushed and that water is seen discharging. You need to see that each drip lateral is working, which is impossible once it is connected to the flushing manifold.

 

Explore the next module, or search for a specific topic or issue.

Before using these modules, please familiarize yourself with the relevant disclaimers and additional safety and usage information contained within each module.

© 2023, Rivulis Irrigation Ltd, all rights reserved. 
Reproduction of this content in any form is prohibited without the written consent of Rivulis Irrigation Ltd.