During installation

For flat drip lines and tapes – drippers face up.
ALWAYS

Always ensure that when you install, the drip emitters face up.

Sediment will build in the tube over time. This sediment falls to the bottom of the tube. If the dripper is on the bottom of the tube, it will enter the emitter, greatly increasing your clogging risk.

The above applies for flat drippers and tapes. It is not required for round drip lines that have 2 x outlets on opposing sides.

 
 

Explore the next module, or search for a specific topic or issue.

Before using the content of the Knowledge Hub, please familiarize yourself with the relevant disclaimers and additional safety and usage information contained within the modules/guides being viewed. Keep in mind that due to numerous variances for every application, before making any product or application decision, as always, you should consult with a local irrigation consultant for your specific needs. Case study outcomes are for informational purposes only and actual results may vary.

© 2026, Rivulis Irrigation Ltd, all rights reserved. 
Reproduction of this content in any form is prohibited without the written consent of Rivulis Irrigation Ltd.