How to connect

Thin wall drip line/tape → H6000/H6500 PE submain

Rivulis H6000/H6500 PE layflat has pre-installed threaded outlets in the layflat itself. This avoids the need (and labor) to cut the layflat and insert connectors. It also provides a leak-free seal that does not stretch or wear.

Either T or elbow take-offs (start-connectors) are screwed into the outlets of the H6000/H6500 layflat, or installed using a quick connector take-off. Either thin wall tape or drip line is connected to the take-off using the screw connector.

Before deploying the hose, prepare a shallow ditch for the H6000 to be installed

 

When rolling, ensure that outlets face up

 

Avoid sharp angles. H6000 elbow connectors are available where 90° connections are required.

 

Install start connectors into outlets

 

Install drip line / drip tape

 
 

Explore the next module, or search for a specific topic or issue.

Before using these modules, please familiarize yourself with the relevant disclaimers and additional safety and usage information contained within each module.

© 2023, Rivulis Irrigation Ltd, all rights reserved. 
Reproduction of this content in any form is prohibited without the written consent of Rivulis Irrigation Ltd.