Leak cause – damage during installation

A good reminder to adhere to the installation guidelines in Module 3. Remember the primary causes of damage that can occur from poor condition installation equipment – friction burns, sharp edges, burns, and nicks. Daily inspection of the equipment is required.

Poor/incorrect installation can damage tube and result in holes that will cause leaks upon startup.

 

 

Explore the next module, or search for a specific topic or issue.

Before using these modules, please familiarize yourself with the relevant disclaimers and additional safety and usage information contained within each module.

© 2023, Rivulis Irrigation Ltd, all rights reserved. 
Reproduction of this content in any form is prohibited without the written consent of Rivulis Irrigation Ltd.