How to apply oxidation treatments

1. First flush the system.

2. Verify there are no water leaks in the field.

3. Verify the system is operating with the proper pressure.

4. Inject the peroxide for required time and during the injection, measure the concentration (ppm) at the end of the drip line to ensure it is reaching the target.

5. For period injection regimes, after the injection has finished, continue to irrigate after the injection to remove the remains of the chemical in the system (minimum 30 minutes).

6. It is recommended to check the concentration (ppm) is back to normal to verify.

Explore the next module, or search for a specific topic or issue.

Before using the content of the Knowledge Hub, please familiarize yourself with the relevant disclaimers and additional safety and usage information contained within the modules/guides being viewed. Keep in mind that due to numerous variances for every application, before making any product or application decision, as always, you should consult with a local irrigation consultant for your specific needs. Case study outcomes are for informational purposes only and actual results may vary.

© 2026, Rivulis Irrigation Ltd, all rights reserved. 
Reproduction of this content in any form is prohibited without the written consent of Rivulis Irrigation Ltd.