Drip line product naming

Drip lines express their flow-rate as the flow per drip emitter.

For example, the product Rivulis D1000 16/8/1.0/0.3 is:

  • 16 mm diameter
  • 8 mil wall thickness
  • 1.0 l/h (per drip emitter)
  • 0.3 m drip emitter spacing.

 

In US measurements, the product Rivulis D900 5/8”/8/0.26/12 is:

  • 5/8” diameter
  • 8 mil wall thickness
  • 0.26 gph (per drip emitter)
  • 12” drip emitter spacing.

Explore the next module, or search for a specific topic or issue.

Before using the content of the Knowledge Hub, please familiarize yourself with the relevant disclaimers and additional safety and usage information contained within the modules/guides being viewed. Keep in mind that due to numerous variances for every application, before making any product or application decision, as always, you should consult with a local irrigation consultant for your specific needs. Case study outcomes are for informational purposes only and actual results may vary.

© 2026, Rivulis Irrigation Ltd, all rights reserved. 
Reproduction of this content in any form is prohibited without the written consent of Rivulis Irrigation Ltd.